<![CDATA[Hamilton Connections: jobboards]]> https://JOBS.HAMILTONCONNECTION.COM/ en-us <![CDATA[Chemical Technician]]> Hamilton Connections is seeking candidates for a chemical packer position at a company in New Milford, CT. This is a temp-to-hire position.

The chemical technician is responsible for repackaging chemicals from large packages into smaller sizes by hand.

The hours are 8:15 a.m.-5 p.m., Monday-Friday. The salary is at $18 an hour.

Job Responsibilities:
  • Procure product packaging material
  • Repackage chemicals from large packages into smaller sizes by hand
  • Read, interpret and execute specifications from work order
  • Provide detailed paperwork flow to maintain compliance and inventory accuracy
  • Handle hazardous waste and control waste stream/flow
  • Keep work area clean and free of safety hazards
  • Other duties as assigned
 
Job Requirements:
  • High school diploma or GED required
  • Willing and able to safely handle hazardous materials
  • Able to climb ladders to heights of approximately 15 feet
  • Basic math skills
  • Ability to read and interpret work orders
  • Ability to complete detailed paperwork
  • Strong attention to details
  • Ability to lift up to 70 lbs. and push upto of 500 lbs. on a drum cart
  • Ability to push, pull, squat down to floor and reach overhead
  • Ability to stand for long periods of time
  • Able to work with minimal supervision
  • Required to wear PPE: safety glasses, aprons, gloves, safety jackets and sleeves
  • Able to pass pre-employment screenings
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[CDL-B Driver]]> Hamilton Connections is seeking candidates for Delivery driver positions for a company in Meriden, CT. 
Drivers are responsible for operating company vehicles to deliver goods to various locations in a timely and efficient manner. Candidates must have clean driving records, a valid driver’s CDL-B License and a valid DOT medical card.
Two shifts are available: 2 p.m.-11 p.m. or 1 a.m.-10 a.m. Candidates must have open availability to work weekends.
The salary is $24 an hour.

Job Responsibilities:
  • Operate company vehicles safely to deliver goods to various locations
  • Load, unload and secure items in the vehicle for safe transit
  • Follow all traffic laws and safety regulations while operating the vehicle
  • Communicate with dispatch to ensure that timely delivery schedules are met
  • Perform routine vehicle inspections and maintain cleanliness of the vehicle
  • Ensure accurate delivery documentation, including obtaining customer signatures upon delivery
  • Other duties as assigned
 
Job Requirements:
  • Valid driver’s license with a clean driving record
  • Valid DOT medical card
  • Experience driving delivery vans and/or box trucks
  • High school diploma or equivalent
  • Ability to stand, walk, and lift to 50 pounds regularly
  • Ability to work in a fast-paced and physically demanding environment
  • Warehouse experience
  • Able to work flexible schedule and holidays
  • Excellent organizational and time-management skills
  • Strong attention to detail and ability to work under pressure
  • Good communication skills, both written and verbal
  • Ability to work independently and as part of a team
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Warehouse - Order Pickers / Packers]]> Hamilton Connections of Milford is currently looking for a full-time warehouse - order picker & packers.  

This is a long-term, potentially Temp to Hire position.  It will start out part-time during training but then increase to full-time.  The shift will be 1st (9am-5pm), Monday through Friday, with some possible Saturdays during their busy season.  

Candidates must have prior warehousing experience - including picking and packaging orders for shipment.  A good attention to detail is a must.  Candidates must also be able to handle and work with small/delicate items.  

Reliable transportation is a must.  Working some Saturdays may be required during busy times of the year.   

Bilingual: English/Spanish is a plus.  

Candidates must also be able pass a pre employment background and drug screening.

Pay is $17.00 per hour to start but could increase once training is completed.

For more information please call our office at 203-882-5025 or you can apply directly to this posting.
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[QC Inspection]]> Hamilton Connections is seeking candidates for an inspector position at a manufacturing company in Oxford, CT. Previous quality control inspecting experience in a manufacturing setting is a plus but not necessary. This is a temp-to-perm position.
The hours are 7 a.m.-5:30 p.m., Monday-Friday, The salary is $18 per hour.
 
Job Responsibilities:
  • Conduct thorough inspections and tests on products or materials at various stages of production or delivery
  • Verify that products meet specified quality standards
  • Document and report inspection results accurately
  • Work closely with production teams to resolve quality issues
  • Other duties as assigned
 
Job Requirements:
  • Quality control experience preferred
  • Strong attention to detail and commitment to quality
  • Able to communicate findings clearly and effectively to relevant teams
  • Technical skills, inducing ability to read blueprints and use precsion measuring instruments
  • Computer skills 
 
Please contact Hamilton Connections of Waterbury for more details. 
 
 
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Assembler/Machine Operator]]> Hamilton Connections is looking to fill an assembly and machine operator role for a manufacturing company in the Wallingford area. The ideal candidate must have steady verifiable work history. This is a temp to hire position. Please send us your resume for consideration.
 
Qualifications:
  1. Hand soldering on circuit boards
  2. Light assembly and backing
  3. Attention to detail
  4. Able to work with small parts
 
 Details:
  1. Assemble small parts 
  2. Availability:  Monday - Friday, 1st shift
  3. $19.50-$25 per hour depending on experience 
  4. Computer assembly helpful
  5. Other jobs as needed 
  6. Pre-employment screens required.
 
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Food Production Lead]]> Key Responsibilities:
-Machine Operation Operate food production and packaging equipment, monitor output and efficiency, troubleshoot issues, and make adjustments to optimize quality and minimize waste.

-Maintenance & Cleaning Perform routine maintenance on machinery including cleaning, lubricating, and adjusting equipment to ensure optimal performance and prevent breakdowns.

-Documentation Maintain accurate production records, batch logs, equipment logs, and quality documentation.

-Regulatory Compliance Adhere to food safety regulations and industry standards including HACCP and GMP.

Requirements
  • Forklift certification (required)
  • Mechanical ability and equipment troubleshooting experience (recommended)
  • Bilingual Spanish skills (highly desirable)
  • Willingness to work extended hours when needed
  • 2+ years in food production or similar 
  • Must pass a pre-employment criminal background check
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Manufacturing Lab Technician]]> Quality Control
 
Hamilton Connections is looking for Quality Control Technicians for a manufacturing company in Cheshire, CT. This is a temp-to-perm position.
6 a.m.-4:30 p.m. plus O.T., Monday-Friday, $20-$23 per hour.
 
Job Responsibilities:
 
  • Examine manufacturing processes and operational techniques
  • Monitoring operations to ensure that they meet production standards
  • Recommending adjustments to the assembly or production process
  • Inspecting, testing, or measuring materials or products being produced
  • Measuring products with rulers, calipers, gauges, or micrometers
  • Accepting or rejecting finished items
  • Removing all products and materials that fail to meet specifications
  • Reporting inspection and testing data such as weights, temperatures, grades, moisture content, and quantities inspected
  •  Other duties as assigned 
Job Requirements:
 
An eye for detail, to catch defects.
Experience with quality management systems (QMS).
Math skills – data reporting, measuring, calibrating, and calculating specifications are just some of the many skills you should possess.
Critical thinking skills, to help work through customer problems and production issues, as well as develop strategies for improving product quality.
High school diploma or GED.
Good physical condition.
Good organizational skills.
Attention to detail.
Good written and verbal communication.
 
Please submit a resume to this post for consideration. 
For a full list of job openings or to complete an application, visit hamiltonconnection.com.
 
 
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Production Line Worker]]> Production Line Worker (Temp-to-Hire) — Start ASAP
Location: (Provide location when posting)
Schedule: Monday–Friday, 7:30 AM–4:00 PM
Rate: $18.00/hour
Start: Immediate
Employment type: Temporary with potential for permanent hire
Overview
Seeking a reliable Production Line Worker to join a manufacturing team immediately. This is an entry-level, fast-start role focused on basic production tasks with opportunity for continued employment.
Key responsibilities
  • Stand at production line and inspect finished products for quality
  • Apply labels/stickers accurately
  • Pack products into boxes for shipment
  • Assist with general floor duties: setup, organization, and housekeeping
  • Perform occasional heavy lifting (material handling and moving)
  • Follow safety procedures and quality standards
Qualifications
  • Prior manufacturing or production experience preferred
  • Ability to read and speak English
  • Comfortable standing for extended periods and performing physical tasks
  • Able to lift and move moderate weight (typical production floor lifting)
  • Reliable attendance and punctuality
Requirements
  • Must be able to start immediately
  • Must pass a background check
  • Please submit resume and a one-paragraph write-up describing candidate’s relevant experience for client approval
Other details
  • Initial opening for 1 temp position; additional temps may be added soon
  • Temp-to-hire opportunity based on performance
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Assembly / Soldering / Electronics / Machine Operation]]> Hamilton Connections of Milford is currently looking to fill the following positions, for assemblers, solderers, and machine operators, throughout the Milford area.

These are full-time, 1st shift positions that offer the chance to get hired on permanently. 

- Assemblers: entry level electro-mechanical assembly

- Soldering Tech:  prior experience soldering electronic components or wire.

- Machine Operator: set-up and operation of wire cutting / CNC machines.  

Prior experience is required for these positions.  If interested and qualified please submit your resume to this posting. 

A pre employment background is required.    

If you have any questions you can also contact our office at 203-882-5025.  For more information or to see additional job openings we may have please visit www.hamiltonconnection.com 

Pay Range for these positions:  $17.50 - $20.00 per hour based on the position and level of experience  
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Shipping and Receiving]]> Hamilton Connections is looking for shipping and receiver supervisor for a manufacturing company in Wolcott, CT. This is a temp to hire position. 
The hours are 7 a.m.-5:30 p.m., Mon-Fri. The pay is $20-22 per hour. 
Job Responsibilities: 
 
•       Receive and verify incoming shipments
•       Paint mixing
•       Prepare outgoing shipments 
•       Maintain accurate records 
•       Load and unload trucks 
•       Keep work area clean
•       Other duties as assigned 
 
Job Requirements:
 
•       Shipping and receiving experience, leadership role  
•       Communication skills to interact with customers dropping off and picking orders
•       Experience with material handling equipment, such as pallet jacks
•       Forklift experience 
•       Ability to handle physical aspects of the job, including moderate to heavy lifting 
•       Ability to use and read scales 
•       Computer and data entry skills 
•       High school diploma or equivalent
]]> Thu, 07 May 2026 00:00:00 EDT 0 <![CDATA[Warehouse - Material Handling - Forklift Operator]]> Hamilton Connections of Milford is currently recruiting for an experienced warehouse worker, with strong forklift experience.

This is a full-time 1st shift position, located in the West Haven area.

We are looking for a candidate with the following:
- Proven warehouse - material handling work experience
- Strong forklift experience, prior certification preferred
- Inventory control knowledge
- The ability to lift up to 50lbs 
- Able to pass a pre employment background and drug screening

The pay range would be $18-$20 per hour DOE

If interested and qualified please submit your resume.

]]> Wed, 06 May 2026 00:00:00 EDT 0 <![CDATA[Assembler]]> Hamilton Connections is seeking candidates for assembler positions at a manufacturing company in Danbury, CT. These are temp-to-hire positions.

The first shift is 7 a.m.-3:30 p.m., Monday-Friday. The salary is $19 an hour.

The second shift is 3:30 p.m.-12 a.m., Monday-Friday. The salary is $21 an hour.

Job Responsibilities:
  • Accurately pick necessary parts for production orders
  • Assemble, check and package sub-components and finished products according to instruction and production order in a quality and schedule-minded fashion
  • Execute special tasks within the assembly process
  • Mount items necessary for fulfilling the assembly orders of sub-components and finished products
  • Maintain order at the workplace
  • Temporary assignments as floater in different assembly teams
  • Cooperation within assembly team
  • Perform computer and administrative work such as order printing, label creation, order confirmation and tracking
  • Coordinate transport arrangements with shipping
  • Prioritize and arrange production papers and pick list based on commitment level to customers
Job Requirements:
  • Assembly and/or manufacturing experience
  • Forward thinking with good time management skills
  • Average manual dexterity
  • Mechanical ability necessary
  • Able to handle physical aspects of the job, including moderate to heavy lifting and standing for long periods
  • Able to operate manufacturing equipment and electronic test equipment
  • Able to read and write in English
  • Able to work overtime
  • Able to pass pre-employment screenings  
]]> Wed, 06 May 2026 00:00:00 EDT 0 <![CDATA[Customer Service Representative]]> Hamilton Connections is seeking candidates for a customer service representative position at a company in Danbury CT. This is a temp-to-hire position. 

The hours are 9 a.m.-5:30 p.m., Monday-Friday. The position is in-office. The salary is $20-$22 an hour. 

Job Responsibilities:
  • Accurately and efficiently process customer orders in ERP system
  • Handle high volume of email correspondence and phone calls from various areas in a professional manner
  • Handle high volume of LiveChat interactions in a professional manner
  • Organize and maintain filing systems
  • Follow-up on problem or held orders on a weekly basis
  • Process the outgoing mail on a daily basis
  • Process daily invoices and credit memos
  • Accurately process quote requests from territory sales managers and our customers
  • Answer customer and consumer inquiries from various forms of communication
  • Provide basic troubleshooting and technical support for the various video magnifiers in product line
  • Process reshipment of ‘return to sender’ packages           
  • Other duties as assigned 
 
Job Requirements:                     
  • 2 years or more of customer service experience 
  • Experience in a call center preferred 
  • Proficiency with computers including the Microsoft Office suite of applications (Excel, Word, PowerPoint)
  • Knowledge of ERP or order-entry systems 
  • Familiarity with CRM software preferred 
  • Experience with website chat box software preferred 
  • Expert time management skills and the ability to manage multiple tasks simultaneously
  • Excellent phone skills and the ability to handle problems adeptly and leave customers satisfied
  • Commitment to learn, embrace and adhere to customer service guidelines for interaction with customers
  • Able to pass pre-employment screenings 
]]> Wed, 06 May 2026 00:00:00 EDT 0 <![CDATA[Packer (Temp)]]> Hamilton Connections is seeking candidates for temporary packer positions at a manufacturing company in Walden NY.

The hours are 5 a.m. to 5 p.m., Monday-Friday. The salary is $19.50 per hour.

Job Responsibilities:
  • Pick products from inventory
  • Inspect items for damage before packing
  • Pack materials into boxes for shipping
  • Maintain clean and organized work space
  • Other duties as assigned
 
Job Requirements:
  • Packing and/or warehouse experience strongly preferred
  • Able to handle physical aspects of the job, including standing for long periods
  • Able to read, write and speak English
  • Able to pass pre-employment screenings
]]> Tue, 05 May 2026 00:00:00 EDT 0 <![CDATA[Assembler]]> Hamilton Connections is seeking candidates for an assembler position at a company in New Milford CT. This is a temp-to-hire position.

The hours are 9 a.m.-5 p.m., Monday-Friday. The salary is $18.50 an hour.

Job Responsibilities:
  • Follow instructions to assemble plaques, trophies and other awards using hand tools
  • Ensure finished products meet quality standards
  • Maintain clean work area
  • Other duties as assigned
Job Requirements:
  • Assembly experience
  • Experience using hand tools such as screwdrivers, drills, hammers/mallets
  • Must be able to measure using a ruler/tape measure
  • Able to read and write in English
  • Able to pass pre-employment screenings
]]> Tue, 05 May 2026 00:00:00 EDT 0 <![CDATA[Production Assistant]]> Hamilton Connections is seeking candidates for production assistant positions at a manufacturing company in Walden, NY. Day and overnight shifts are available. These are temp-to-hire positions.

The day shift is 5 a.m. to 5 p.m., Monday-Friday. The overnight shift is 5 p.m.-5 a.m., Monday-Friday.

The salary is $19.50 per hour.

Job Responsibilities:
  • Assist machine operator in the operation, repair and maintenance of equipment
  • Stack boxes on pallets
  • Keep glue pan full
  • Keep machine area and aisles clean
  • Properly assist examiner as needed
  • Pack and label boxes
  • Fill out production ticket
  • Monthly machine lubrication
  • Yearly preventative maintenance on machinery
 
Job Requirements:
  • Manufacturing and warehouse experience
  • Working knowledge of hand tools and have mechanical/repair skills
  • Able to read and understand written directions
  • Able to write legibly
  • Able to lift and handle boxes up to 50 pounds
  • Able to stand continuously for a 12-hour shift
  • Steady verifiable work history
  • Able to adhere to company policy, safety rules and regulations, and wear PPE
  • Able to pass pre-employment screenings
]]> Tue, 05 May 2026 00:00:00 EDT 0 <![CDATA[Purchasing Assistant]]> Hamilton Connections is seeking candidates for a purchasing assistant position at a manufacturing company in Bethel, CT. This is a temp-to-hire position.

The hours are 8 a.m.-4:30 p.m., Monday-Friday. The salary is $22-$24 an hour, based on experience.

Job Responsibilities:
  • Assist purchasing department by helping to manage purchase orders, monitor inventory levels, research vendors, and track deliveries
  • Work with staff to compare deliveries with purchase orders to identify discrepancies
  • Process invoices, maintain procurement records, and prepare reports on supplier performance or costs
  • Communicate with vendors to obtain quotes and resolve discrepancies in shipments or invoices
  • Other duties as assigned
 
Job Requirements: 
  • Bachelor’s degree strongly preferred 
  • Purchasing experience; experience with purchasing metal a plus
  • Proficient in Microsoft Office suite
  • Experience with ERP software
  • Strong organizational and communication skills
  • Able to pass pre-employment screenings


]]> Tue, 05 May 2026 00:00:00 EDT 0 <![CDATA[1st shift Machine Operator]]> Hamilton Connections is seeking Machine Operators to fill open 1st shift positions in Farmington, CT. 
      
Hours: 6am - 2:30pm         
Monday - Friday         
$18/hour+ (depending on experience)  
Weekly Pay            
         
Summary:    
Perform basic machine functions in a safe and detail orientated manner.
      
Primary Duties:         
  • Responsible for stopping the machine when parts do not meet requirements
  • Operating various kinds of manufacturing equipment   
  • Maintains production records and quality records    
  • Ensure a clean and safe work environment in line with company safety policies at all times  
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Electrical Engineer]]> Hamilton Connections is seeking candidates for an electrical engineer position at a manufacturing company in Newtown, CT. This is a direct-hire opportunity.  

The electrical engineer is a managerial role and requires leadership experience. The electrical engineer/manager is part of the research and development group, and will work to advance the ultrasonics industry by cultivating an environment that fosters a spirit of innovation and creativity.

The hours are 8 a.m.-5 p.m., Monday-Friday. Salary is based on experience.
 
Job Responsibilities:
  • Use various analysis programs and CAD systems
  • Lead and manage a team of engineers; provide guidance, mentorship and provide feedback to ensure optimal productivity and growth
  • Oversee the design, development and implementation of various engineering projects, ensuring they are completed on time, within budget and in accordance with quality standards
  • Work closely with stakeholders to understand their requirements and translate them into technical specifications
  • Create innovative ultrasonic generator designs that meet cost targets and market requirements
  • Design and develop electrical systems to drive piezoelectric converters/transducers
  • Provide systems engineering design and analysis
  • Create electrical and system models, schematics, printed circuit board layouts and assembly drawings from sketches, notes or customer supplied models
  • Implement and maintain engineering best practices, standards and procedures to ensure the efficiency and effectiveness of the engineering department
  • Other duties as assigned
 
Job Requirements:
  • Bachelor’s degree in electrical engineering
  • 10 or more years’ relevant design and development experience
  • Experience with analog and digital circuit design principles
  • Experience with high power switching electronics and magnetics for driving capacitive loads
  • Experience with embedded system design including A/D and D/A signal processing
  • Experience with PSPICE or other modeling software
  • Experience with embedded microprocessor development, design and software tools
  • Experience with electronic laboratory equipment and computer technologies
  • Scientific skills and analytical ability to diagnose problems
  • Hands-on debug skills of electronic designs
  • Knowledge of analog and digital design rules for printed circuit board layout
  • Ability to interact with outside suppliers and internal departments
  • Proficiency in the following computer/software packages including Altium Designer, SPICE, Windchill and Microsoft Office
  • Excellent written and oral communications skills
  • Strong leadership skills, proven track record of managing and motivating a team of engineers
  • Excellent technical acumen, with a deep understanding of engineering principles, techniques and methodologies
  • Ability to collaborate on multiple projects with small technical team and other departments
  • Strong customer centric focus
  • A driven work ethic to solve problems
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[CNC Operator]]> Hamilton Connections is seeking candidates for a CNC operator position at a manufacturing company in New Milford, CT. This is a temp-to-hire position.

The hours are 7:30 a.m.-4 p.m., Monday-Friday. The salary is $18-$22 an hour, depending on experience.

Job Responsibilities:
  • Tend to and run multiple CNC milling and turning centers, including loading and unloading material and parts
  • Cut raw stock
  • Deburr and hand finish parts
  • Perform in process quality checks to ensure customer requirements are satisfied
  • Perform routine machine maintenance
  • Communicate issues with parts, equipment and workmanship
  • Log time against work orders and track quality issues
  • Communicate with supervisors and management regarding work order status and potential issues
  • Other duties as assigned
 
Job Requirements:
  • CNC machine operating and set up experience
  • Quality control experience, including using precision measuring tools
  • Deburring experience
  • Able to handle physical aspects of the job, including heavy lifting
  • High school diploma or equivalent
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Assembler 2]]> Hamilton Connections is seeking candidates with strong mechanical skills for assembler 2 positions at a manufacturing company in Danbury, CT. These are temp-to-hire positions.

The first shift is 7 a.m.-3:30 p.m., Monday-Friday. The salary is $20.25 an hour.

The second shift is 3:30 p.m.-12 a.m., Monday-Friday. The salary is $22.25 an hour.

Job Responsibilities:
  • Accurately pick necessary parts for production orders
  • Assemble, check and package sub-components and finished products according to instruction and production order in a quality and schedule-minded fashion
  • Execute special tasks within the assembly process
  • Mount items necessary for fulfilling the assembly orders of sub-components and finished products
  • Maintain order at the workplace
  • Temporary assignments as floater in different assembly teams
  • Perform computer and administrative work such as order printing, label creation, order confirmation and tracking
  • Coordinate transport arrangements with shipping
  • Prioritize and arrange production papers and pick list based on commitment level to customers
 
Job Requirements:
  • Assembly and/or manufacturing experience
  • Strong mechanical skills
  • Experience using hands tools, such as combination wrenches
  • Able to work from schematics
  • Able to handle physical aspects of the job, including heavy lifting
  • Able to work independently  in a fast-paced environment
  • Forward thinking with good time management skills
  • Able to operate manufacturing equipment and electronic test equipment
  • Excellent communication skills
  • Able to work overtime as needed
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Machinist]]> Hamilton Connections is seeking candidates with CNC lathe experience for a machinist position at a manufacturing company in Newtown, CT. This is a temp-to-hire position.

The hours are 7:30 a.m.-4 p.m., Monday-Friday. The salary is $24-$30 an hour, depending on experience.

Job Responsibilities:
  • Deliver production jobs on time and within budget
  • Setup, maintenance and operation of lathes, CNC & NC machines
  • Support the manufacturing engineering team to develop process sheets for new products
  • Operate up to 3 machines at one time
  • Set up machines for the next shift operators based on orders
  • Review samples, drawings or instructions to understand specifications of output
  • Plan the sequence of necessary actions for the completion of a job
  • Take measurements and mark material for cutting or shaping
  • Select appropriate machines and position or load material for a job
  • Determine and program size of batches, speed of machine etc.
  • First piece inspections using micrometers, calipers and 3D scanners to ensure parts are within tolerance
  • Monitor machine while working to adjust the feed, maintain temperature and identify issues
  • Check output to ensure consistency with specifications and discard defects
  • Secondary duties such as deburring, welding, fabrication, assembly and other manufacturing tasks
  • Maintain a safe working atmosphere and safe use of machines
  • Other duties as assigned
 
Job Requirements:
  • 5 or more years of proven CNC lathe experience
  • Experience operating multiple CNC machines at once; experience with DMG Mori, Noumara Swiss machines strongly preferred
  • Set up & run complete jobs from drawings & sketches
  • Experience with machining titanium and aluminum
  • Experience working to +/- 0.005 machining tolerance
  • Experience changing tools, offsets and selecting programs on machines according to process method sheets
  • Familiar with G code and programming of CNC machines
  • Experience doing first piece inspections using micrometers, calipers and 3D scanners to ensure parts are within tolerance
  • Deburring, welding, fabrication, assembly and other manufacturing experience a plus
  • Ability to handle physical aspects of job, including heavy lifting
  • Excellent written and oral communications skills
  • Ability to collaborate on multiple projects with small technical team and other departments
  • Strong customer centric focus
  • A driven work ethic to problem solve
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Incoming Inspector]]> Hamilton Connections is seeking candidates for an incoming inspector position at a manufacturing company in Danbury, CT. This is a temp-to-hire position.

The incoming inspector is responsible for ensuring products are inspected as per company policies and procedures.

The hours are 10 a.m.-6 p.m., Monday-Friday. The salary is $25.50-$27.50 an hour, depending on experience.

Job Responsibilities:
  • Test (using special measurements) incoming goods
  • Communicate information on failed product inspections
  • Perform and record first article inspections per procedure
  • Document all test reports in software system
  • Work closely with engineering and production management to prioritize projects and optimize resources to accommodate peak production periods
  • Support all quality issues
  • Document and maintain records of the quarantined materials
  • Coordinate and maintain calibration records
  • Other duties as assigned
 
Job Requirements:
  • Technical degree preferred
  • 5 or more years of experience in production inspection and/or quality control
  • Proficient in MS Office
  • ERP experience
  • Warehouse management system experience 
  • Experience with precision measuring instruments, including CMM
  • Strong written and verbal communication skills
  • Able to pass pre-employment screenings 
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[CNC Milling Machinist]]> Hamilton Connections is seeking candidates for a CNC milling machinist position at a manufacturing company in Bethel, CT. This is a temp-to-hire position.

The hours are 7 a.m.-3:30 p.m., Monday-Friday. The salary is $20-$30 an hour, based on experience.

Job Responsibilities:
  • Setup, maintenance and operation of Haas CNC mills
  • Deliver production jobs on time and within budget
  • Monitor in-process dimension standards
  • Review instructions to understand specifications of output
  • Monitor machine while working to make necessary adjustments and identify issues
  • Other duties as assigned
 
Job Requirements:
  • Experience operating CNC mills; experience operating lathes a plus
  • Experience setting up CNC machines for production
  • Possess a good understanding of QA and/or manufacturing processes
  • Experience with measuring instruments and blueprints
  • ISO/AS9100 experience a plus
  • Able to handle physical aspects of the job, including standing for long periods and heavy lifting
  • Able to work overtime when needed
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Quality Control Technician]]> Hamilton Connections is seeking candidates for a quality technician position at a manufacturing company in Bethel, CT. This is a temp-to-hire position.

The hours are 7 a.m.-3:30 p.m., Monday-Friday. The salary is $20-$30 an hour, based on experience.

Job Responsibilities:
  • Perform quality control inspection on raw materials and in-process/finished parts
  • Maintain department and all inspection records
  • Collect samples per appropriate AQL
  • Conduct visual and mechanical tests on component parts
  • Provide technical assistance to production personnel as required
  • Maintain calibration program as required for all gages, pins, fixtures and associated tools
  • Responsible for first piece sign off documents, in-process quality documents and finished product inspections and documentation
  • Records tests results
  • Provide feedback to supervisor, set-up personnel and operators and department managers
  • Make recommendations for resolving quality issues
  • Other duties as assigned
 
Job Requirements:
  • A minimum of 3-5 years work experience in quality control or inspection in a metal machining environment
  • Dexterity and preciseness required to operate gauges and testing equipment
  • Proven experience and ability to use basic QA measuring equipment and measuring tools such as micrometers, calipers, hardness testing and shadow graphs
  • Sound math skills
  • Solid knowledge of metals and metal working
  • Prior machining experience a plus
  • Good communication skills, both written and verbal
  • Able to maintain high degree of mental focus and strict attention to detail
  • Must read, write, and speak English and know how to read engineering drawings
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[CNC Swiss Machinist (2nd Shift)]]> Hamilton Connections is seeking candidates for a CNC Swiss machinist position on the second shift at a manufacturing company in Bethel, CT. This is a temp-to-hire position.

The hours are 3:30 p.m.-12 a.m., Monday-Friday. The salary is $20-$30 an hour, based on experience.

Job Responsibilities:
  • Setup, maintenance and operation of Swiss (Citizen) screw machines, and/or secondary machinery
  • Deliver production jobs on time and within budget
  • Monitor in-process dimension standards
  • Review instructions to understand specifications of output
  • Monitor machine while working to make necessary adjustments and identify issues
  • Other duties as assigned
 
Job Requirements:
  • Experience operating CNC Swiss machines
  • Experience setting up CNC Swiss machines for production
  • Possess a good understanding of QA and/or manufacturing processes
  • Experience with measuring instruments and blueprints
  • ISO/AS9100 experience a plus
  • Able to handle physical aspects of the job, including standing for long periods and heavy lifting
  • Able to work overtime when needed
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[CNC Lathe Machinist (2nd Shift)]]> Hamilton Connections is seeking candidates for a CNC lathe machinist position on the second shift at a manufacturing company in Bethel, CT. This is a temp-to-hire position.

The hours are 3:30 p.m.-12 a.m., Monday-Friday. The salary is $20-$30 an hour, based on experience.

Job Responsibilities:
  • Setup, maintenance and operation of Haas CNC turning centers
  • Work with engineering to install and optimize new production programs and setups
  • Maintain quality of all parts produced by continued machine side inspection during runs
  • Deliver production jobs on time and within budget
  • Review instructions to understand specifications of output
  • Monitor machine while working to make necessary adjustments and identify issues
  • Other duties as assigned
 
Job Requirements:
  • At least 5 years of experience setting up and operating CNC turning centers, primarily Haas, in a fast-paced production environment 
  • Assist less skilled operators to maintain production and quality standards
  • Possess a good understanding of QA and/or manufacturing processes
  • Proficient with measuring instruments and reading blueprints
  • ISO/AS9100 experience a plus
  • Able to handle physical aspects of the job, including standing for long periods and heavy lifting
  • Able to work overtime when needed
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Senior Quality Engineer]]> Hamilton Connections is seeking candidates for a senior quality engineer position at a manufacturing company in New Milford CT. This is a direct-hire opportunity.

The senior quality engineer is responsible for leading quality initiatives within a manufacturing environment to ensure products and processes meet internal standards, customer requirements and regulatory expectations.

The hours are 8 am.-5 p.m., Monday-Friday with some flexibility. The salary is $75,000-$85,000 a year, depending on experience.

Job Responsibilities:
  • Lead quality planning and improvement activities for manufacturing processes
  • Drive root cause analysis and corrective/preventive actions (CAPA, 8D)
  • Analyze quality data and trends using statistical process control and other statistical tools
  • Support new product introductions (PFMEA, Control Plans, PPAP/APQP)
  • Ensure compliance with quality management systems (ISO 9001, IATF, AS9100, etc.)
  • Lead internal audits and support customer and regulatory audits
  • Investigate customer complaints and coordinate effective resolutions
  • Collaborate with engineering, manufacturing, and supply chain teams
  • Support supplier quality activities as needed
  • Other duties as assigned
 
Job Qualifications:
  • Bachelor’s degree in engineering or related field
  • 5 or more years of quality engineering experience in a manufacturing environment
  • Strong knowledge of quality tools (FMEA, SPC, PPAP, DOE, Lean/Six Sigma)
  • Experience with quality management systems and audits
  • Proven problem-solving, leadership, and communication skills
  • CQE, CQA, or Six Sigma certification strongly preferred
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Finishing Machine Attendant (2nd shift)]]> Hamilton Connections is seeking candidates for finishing machine attendant positions on the second shift at a manufacturing company in Sandy Hook, CT. These are temp-to-hire positions.  

The hours are 4 p.m.-2 a.m., Monday-Thursday. Training is required on the first shift, 6 a.m.-4 p.m. The salary is $17 an hour.

Job Responsibilities:
  • Fan through cartons being fed into machines to insure they are the correct ones and weed out the damaged ones
  • Place cartons in feed hopper of machines in accordance with instructions of the machine operator
  • Start and stop machines on instruction or if machine is not operating properly
  • Observe the functions of the machine and notify the operator or supervisor of any malfunction
  • Pick cartons off machine belt and check for defects.
  • When packing corrugated cases, check to make certain the right cases are being used
  • Maintain integrity of the carton count and pack in accordance with customer specifications
  • Sort through finished cartons, inspect for defects and repack for shipment to customer.
  • Maintain departmental and plant safety practices
  • Enforce plant safety and general housekeeping procedures
  • Other duties as assigned
 
Job Requirements:  
  • Manufacturing experience preferred
  • Able to handle physical aspects of the job, including standing and bending and moderate lifting
  • Communication skills
  • Organization skills
  • Reliable and punctual
  • Able to pass pre-employment screenings
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Warehouse Associate]]>  
Hamilton Connections is currently recruiting for warehouse associates for local manufacturing company in Meriden
 
Hours are: 6am-3pm Wednesday-Sunday
Pay: $20.00 hr


  The General Warehouse Associate- Will be responsible for the following job duties:
 
  1. Receive, store and organize incoming goods
  2. Pick, pack and prepare orders for shipping
  3. Maintain inventory
  4. Load and unload trucks of product
  5. Operate forklift and pallet jacks when necessary
  6. Label, sort and do inventory checks
 
 
Job Requirements:
 
  1. Valid Driver’s license
  2. 3-4 years of hands on warehouse experience
  3. 2-3 years of receiving experience
  4. Ability to work in a refrigerated/cold storage environment
  5. Organized and detail oriented
  6. Must be able to work weekends and holidays
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[2nd shift CNC Machine Operator]]> Hamilton Connections is seeking CNC Machine Operators to fill open 2nd shift positions in Farmington, CT. 
       
2nd shift:  2:30pm - 11:00pm    
Monday - Friday                
$22/hour + (depending on experience)      
Weekly Pay              
         
Job Summary:  
We are seeking candidates to fill a CNC Operator role on 2nd shift. In this role, you will be responsible for operating and monitoring machines to produce high-quality products.  

Key Responsibilities: 
 - Set up, program, and operate CNC machines to manufacture parts and components
 - Monitor machine operations and make adjustments as needed to ensure optimal performance and product quality
 - Perform routine maintenance and troubleshooting on CNC equipment
 - Maintain detailed production records and logs
 - Collaborate with the manufacturing team to identify process improvements and implement best practices 

Qualifications:
 - Minimum 2 years of experience in a manufacturing environment
 - Ability to set up, program, and operate CNC machines
 - Strong mechanical aptitude and problem-solving skills
 - Attention to detail and a commitment to quality      
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Tool & Die Maker]]> Hamilton Connections is seeking experienced Tool and Die Makers with experience in Progressive Tool making.

Department: Auto Power Press   
Type: Direct hire 
Shift: 1st and 2nd shift, Monday - Friday
Starting Pay: $30/hour + DOE

Summary: 
This role supports operations by maintaining and implementing systems and programs with regard to tooling and machine maintenance. This role will focus on improving quality, cost, and lead time of production in a fast paced and detail oriented manufacturing environ
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[CNC Operator]]> CNC Operator
2nd Shift
Hours: 3pm-11:00pm Monday – Friday 
Pay: $20+
 
Hamilton Connections is currently recruiting for CNC Operator for local manufacturing company in Southington, CT
 
Essential Duties and Responsibilities:
 
  1. Operate CNC machines to produce precision parts from blueprints
  2. Monitor, adjust and troubleshoot machines 
  3. Use inspection gages to include: calipers, micrometers and optical comparators
 
Job Requirements:
 
  1. High School Diploma or Equivalent
  2. Must have prior CNC/ manufacturing experience
  3. Be able to pass a pre employment drug test and background check
  4. Reliable transportation
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[3rd Shift Warehouse]]> 3rd shift loader

 The General Warehouse Associate- Truck Loader will be responsible for the following job duties:
  • Load Orders and transfers on the different O/T & Transfer trucks as routed by the CDC management team.
  • Support CDC management team in completing shift job responsibilities; pick, pack, stage, and check orders.
  • Maintain a clean and safe work area.

     Required Skills:
  • Eclipse RF system knowledge
  • Product knowledge a plus
  • Attention to detail.
  • Warehouse experience preferred.
  • Fork lift driving experience along either other material handling equipment.
  • Customer service skills may be required.
  • Ability to multi-task and problem solve.
]]> Mon, 04 May 2026 00:00:00 EDT 0 <![CDATA[Machinist Sheet Metal - Mill / CNC Machines]]> Hamilton Connections is currently recruiting for an experienced Machinist, for a Shelton area manufacturing company.

This is a full-time, 1st shift position, what offers the chance to get hired on permanently for the right candidate.   

Candidates should ideally have experience with the following:
- Proven experience setting-up and operating various older style manufacturing machines
- Prior experience working with sheet metal
- Experience operating basic CNC machines
- Knowledge of Bridgeport - Milling machines
- Ability to operate various types of secondary machines - such as deburring machines

A pre employment background and drug screening is required.

Pay range would be between $23.00 - $25.00 per hour to start.

If qualified please submit your resume to this job posting.  
]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Machine Operator / Material Handler( all shifts)]]> Hamilton Connections of Milford is currently looking to fill and job opening for a machine assistant / material handler on the 1st shift.  

This is a full-time position, which can offer the chance to get hired on permanently for the right candidates.  

Employees will be setting up and/or assist with operating production machines, as well as performing material handling/forklift work.  

Prior manufacturing and/or machine operation / set-up experience is required.  Additionally, prior forklift experience is also preferred.

Candidates must also be able to stand for the entire shift and be able to lift up to 50lbs.

A pre employment background and drug screening is also required.

For more information please respond to this job posting or call our office for more details - 203-882-5025.  

Pay is $18.00 - $20.00 per hour to start DOE
]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Production / Warehouse Workers - Packers and Labeling]]> Hamilton Connections of Milford is currently looking for productions workers, for a growing manufacturing company in the West Haven area.

These are full-time, 1st shift positions, that can offer the chance to get hired on permanently. 

Candidates should have the following experience:
- Prior packing or manufacturing work experience
- Material handling - inventory experience a plus
- Ability to lift up to 50lbs
- Bilingual: English / Spanish is a big plus
- Reliable transportation 
- Ability to pass a pre employment background check.  

Pay range is $16.94 - $18.00 per hour DOE and the position.

If interested please apply online or contact our office directly at 203-882-5025 (Se habla Espanol)

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Forklift Operator - 2nd Shift]]> Hamilton Connections is looking for candidates to fill open positions on 2nd shift. Candidates must have prior experience operating a forklift. 
                
Type: Temp-to-hire             
Schedule: 3pm - 11pm. Monday - Friday     
Starting pay: $19.95/hour       
Weekly Pay     
    
Commitment to Safety:  
-Safety glasses, Lifting belts, and Gloves are provided. 
-Steel toe shoes required

]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Production - Packer / Forklift Operator]]> Hamilton Connections of Milford is currently looking for experienced Material Handler / Forklift Operator and experienced Packers for a growing Shelton area company.

Prior experience performing packaging work or warehousing experience, including forklift knowledge.

These positions are full-time, first shift, and offer the chance to get hired on permanently for the right candidates.  

A pre employment background check and drug screening may be required prior to starting these positions.  

 The starting pay rate for these positions is $17.00 - $20.00 per hour depending on the position and level of experience.  

If you're interested in the job opening please respond to this posting with your resume.  You may also call our office (203-882-5025) for more information.  For additional openings or more details about Hamilton Connections please visit our website at www.hamiltonconnection.com 
]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Picker-Packer]]> Hamilton Connections is seeking candidates for picker-packer positions at a manufacturing company in Danbury, CT. These are temp-to-hire positions.  

The first shift is 7 a.m.-3:30 p.m., Monday-Friday. The pay is $19.75 an hour.

The second shift is 3:30 p.m.-12 a.m., Monday-Friday. The pay is $21.75 an hour.
 
Job Responsibilities:
  • Prioritize and arrange pick list based on commitment level to customers
  • Use RF scanners accurately to pick items and quantities
  • While packing confirm picked and package items in appropriate shipping container
  • Follow all special instructions on pick list
  • Operate shipping computer
  • Assist in warehouse functions such as cycle counts and product placement
  • Perform administrative work such as data entry, filing, order printing, label creation, order confirmation and tracking
  • Operate material handling equipment
Job Requirements:
  • Shipping experience
  • Experience using material handling equipment
  • Average manual dexterity
  • Able to handle physical aspects of job, including fast-paced work and moderate to heavy lifting
  • Speak, read and write English
  • Able to use computers and other electronic interface equipment, such as scan guns
  • Able to work flexible hours and overtime, if needed
  • High school diploma or equivalent
  • Able to pass pre-employment screenings
]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Forklift Operator]]> Hamilton Connections is looking for candidates to fill open positions on 1st shift. Candidates must have prior experience operating a forklift.
  
Type: Temp-to-hire                       
Schedule: 7am - 3:30pm      
Starting pay: $19/hour       
Weekly Pay        

Responsibilities:  
  • Moving materials using a forklift 
  • Perform physical inventories and quality checking of all materials
  • Keep work area and warehouse clean and organized to provide a safe work environment
  • Perform other related duties, as required, to achieve the goals and objectives of the company
Commitment to Safety:    
-Safety glasses, Lifting belts, and Gloves are provided. 
-Steel toe shoes required    
]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Material Handler]]> Hamilton Connections is seeking candidates for material handler positions at a manufacturing company in Danbury, CT. These are temp-to-hire positions. 

The first shift is 7 a.m.-3:30 p.m., Monday-Friday. The salary is $21 an hour. 

The second shift is 3:30 p.m.-12 a.m., Monday-Friday. The salary is $23 an hour. 

The third shift is 10:30 p.m.-7 a.m., Sunday-Thursday. Training may be required on the first or second shift. The salary is $25 an hour. 
 
Job Responsibilities:
  • Moving material in and out of pallet racks using forklifts
  • Moving needed materials on time to assemblers using a forklift
  • Making labels using MS Word label program 
  • Taking waste cardboard and lumber to dumpsters
  • Assembling and reassembling pallet racks and shelves as needed
  • Taking special inventory counts for the buyer or planner
  • Packing actuators when needed
  • Other duties as assigned 
Job Requirements: 
  • Forklift experience and previous certification 
  • High school diploma or GED 
  • Knowledge of weighing scales
  • Experience working in a fast-paced warehouse environment 
  • Knowledge to do weigh counts
  • Organization skills to get proper parts to assemblers on time
  • Reading and writing skills necessary for making and reading labels
  • Ability to handle physical aspects of the job, including lifting up to 70 lbs.
  • Able to read and write in English
  • Able to work overtime as needed 
  • Able to pass pre-employment screenings 
]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Picker-Packer 2]]> Hamilton Connections is seeking candidates for picker-packer 2 positions at a manufacturing company in Danbury, CT. These are temp-to-hire positions.  

The first shift is 7 a.m.-3:30 p.m., Monday-Friday. The pay is $21 an hour.

The second shift is 3:30 p.m.-12 a.m., Monday-Friday. The pay is $23 an hour.
 
Job Responsibilities:
  • Utilize Warehouse Management System (WMS) and peripheral equipment to accurately pick and pack material from designated storage locations
  • Pack and confirm materials in appropriate shipping container and apply content label and required shipping documents
  • Prioritize and arrange pick list based on commitment level to customers
  • Follow all special instructions on pick list
  • Operate shipping computer
  • Assist in warehouse functions such as cycle counts and product placement
  • Perform administrative work such as data entry, filing, order printing, label creation, order confirmation and tracking
  • Operate material handling equipment
  • Other duties as assigned
Job Requirements:
  • At least 2 years of picking/packing and shipping experience
  • Experience using material handling equipment
  • Average manual dexterity
  • Able to handle physical aspects of job, including fast-paced work and moderate to heavy lifting
  • Speak, read and write English
  • Able to use computers and other electronic interface equipment, such as scan guns
  • Able to work flexible hours and overtime, if needed
  • High school diploma or equivalent
  • Able to pass pre-employment screenings
]]> Fri, 01 May 2026 00:00:00 EDT 0 <![CDATA[Driver's Helper]]> Hamilton Connections is currently seeking per diem Driver’s Helpers in North Haven, CT. The ideal candidate is reliable and has material handling experience. 

Responsibilities:
  • Unloading trucks 
  • Repetitive lifting
  • Lifting at least 50lbs
  • Must have reliable transportation to get to and from work
Pay:  $16.94 per hour
Schedule:
  • 7am start until done (when everything is delivered)
  • Day shift
  • Busier at the end of the month
  • Per diem
]]> Thu, 30 Apr 2026 00:00:00 EDT 0 <![CDATA[Press Operator & Deburr]]> Hamilton Connections is hiring for a machine operator for a Press Operator and Deburring role.  This position is on-site, temp to hire in Wallingford, CT.
 
Responsibilities:
 
  • Willingness to run press machines, spot welding, and other press machines, and deburr
  • Takes direction well and maintains a positive attitude
  • Pays close attention to detail
  • Is punctual and dependable
  • Is flexible and comfortable sitting or standing for extended periods
  • Can handle repetitive tasks and high production volumes
 
Details:
 
  • Role can be repetitive at times 
  • $20/hour
  • Monday – Thursday, 6AM – 3:30PM, Friday, 6AM – 10AM (hours could change depending on work load
  • Must pass background check and drug test
 
]]> Thu, 30 Apr 2026 00:00:00 EDT 0 <![CDATA[Electrical Mechanical Assembler]]> A leading aerospace manufacturing company in Stamford, CT is seeking a skilled Electrical Mechanical Assembler to join their production team. The ideal candidate will have experience working in a manufacturing environment, reading technical drawings, and assembling both electrical and mechanical components with a high level of accuracy.

Key Responsibilities 
  • Assembly of Aircraft lighting products
  • PC Board Soldering
  • Wiring harness and direct wiring
  • Mechanical assembly 
  • Adhesive dispensing
  • Wire cutting and stripping
  • Ability to read and understand schematics
  • Support of assembly – difficult tasks 
  • Prototypes
 

 Job Requirements and Qualifications

Education: None necessary but technical training or schooling is an advantage
Training Requirements: Not applicable
Knowledge Requirements: Soldering, ability to read blueprints
Experience: PCB repair, Surface mount solder repair is a plus, IPC-A-610 & or SMT soldering training a plus, Manufacturing Schematic and documentation reading.
 
Personal Specification/Essential Qualities
  • Manual dexterity
  • Communication skills
  • The ability to take detailed direction
  • An awareness of health and safety
  • Should be able to read and understand the given information and follow the instructions given
  • An excellent team player with good organizational skills
  • Ability to read and speak English

This position pays $25 - $26/hr and the hours are Monday - Friday 7am-4pm or 8am -5pm Monday - Thursday or 7am - 1pm or 8am - 2pm on Fridays. 


]]> Thu, 30 Apr 2026 00:00:00 EDT 0 <![CDATA[Material Handler - 2nd Shift]]>
We are looking to hire a skilled Material Handler to join a large manufacturing facility in Norwalk Connecticut. This role is critical to maintaining, accurate inventory control, and on-time customer shipments. The ideal candidate has hands-on SAP experience, forklift experience, and experience cleaning, preparing, and packaging materials for shipment.

Key Responsibilities
  • Operate forklifts and other material handling equipment safely and efficiently
  • Receive, inspect, and verify incoming materials against purchase orders
  • Accurately enter and track inventory transactions in SAP
  • Stage raw materials and finished goods for production and shipment
  • Clean, prepare, and package materials according to company and customer specifications
  • Label, palletize, and secure shipments to ensure safe transport
  • Maintain organized inventory locations and perform cycle counts
  • Support production teams by ensuring timely delivery of materials to workstations
  • Follow all safety regulations and company policies
  • Assist with shipping documentation and carrier coordination as needed
Qualifications
  • Minimum 2+ years of material handling experience in a manufacturing environment
  • Hands-on experience using SAP for inventory management and transaction processing
  • Valid forklift certification and proven forklift operating experience
  • Experience cleaning, packaging, and preparing materials for shipment
  • Strong attention to detail and accuracy
  • Ability to lift up to 50 lbs and stand for extended periods
  • Basic computer skills and familiarity with warehouse scanning systems
  • Strong communication and teamwork skills
Hours are Monday - Friday 2:30pm -11pm

$25.30/hr

Hamilton Connections is an affirmative action-equal opportunity employer.
]]> Tue, 28 Apr 2026 00:00:00 EDT 0 <![CDATA[Material Handler]]>
We are seeking a detail-oriented and safety-focused Material Handler to join our cutting-edge manufacturing team in Norwalk Connecticut. This role is critical to maintaining efficient production flow, accurate inventory control, and on-time customer shipments. The ideal candidate has hands-on SAP experience, forklift experience, and experience cleaning, preparing, and packaging materials for shipment.

Key Responsibilities
  • Operate forklifts and other material handling equipment safely and efficiently
  • Receive, inspect, and verify incoming materials against purchase orders
  • Accurately enter and track inventory transactions in SAP
  • Stage raw materials and finished goods for production and shipment
  • Clean, prepare, and package materials according to company and customer specifications
  • Label, palletize, and secure shipments to ensure safe transport
  • Maintain organized inventory locations and perform cycle counts
  • Support production teams by ensuring timely delivery of materials to workstations
  • Follow all safety regulations and company policies
  • Assist with shipping documentation and carrier coordination as needed
Qualifications
  • Minimum 2+ years of material handling experience in a manufacturing environment
  • Hands-on experience using SAP for inventory management and transaction processing
  • Valid forklift certification and proven forklift operating experience
  • Experience cleaning, packaging, and preparing materials for shipment
  • Strong attention to detail and accuracy
  • Ability to lift up to 50 lbs and stand for extended periods
  • Basic computer skills and familiarity with warehouse scanning systems
  • Strong communication and teamwork skills
Hours are Monday - Friday 6am - 2:30pm

$23/hr


Hamilton Connections is an affirmative action-equal opportunity employer.
]]> Tue, 28 Apr 2026 00:00:00 EDT 0 <![CDATA[Food Production Line Stuffing Support]]> Hamilton Connections is recruiting for production workers at local Food Manufacturing Company in Middletown, CT
 
1st shift
7am-330pm
Pay: $16.94
 
2nd Shift
3:30pm-11:30pm
Pay: $16.94
 
JOB DESCRIPTION
 
Hand rolling meat and cheese rolls.
 
ESSENTIAL FUNCTIONS
Reasonable Accommodations Statement
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable
Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
Essential Functions Statement(s)
• Daily, before production starts, prepare work area with food products, tools, and supplies. 
• Perform all tasks in a safe manner. Report all safety hazards to management so that corrective action can be taken
immediately.
• Good attendance is required to do this job satisfactorily
• This job description in no way states or implies that these are the only duties to be performed by the employee. The
employee will be required to follow any other instructions and perform any other duties upon request of the
employee's supervisor.
POSITION QUALIFICATIONS
Competency Statement(s)
• Accountability - Ability to accept responsibility and account for his/her actions.
• Communication, Oral - Ability to communicate effectively with others using the spoken word.
• Customer Oriented - Ability to take care of the customers’ needs while following company procedures.
• Energetic - Ability to work at a sustained pace and produce quality work.
• Judgment - The ability to formulate a sound decision using the available information.
• Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace.
• Time Management - Ability to utilize the available time to organize and complete work within given deadlines.
• Working Under Pressure - Ability to complete assigned tasks under stressful situations.
 
BASIC REQUIREMENTS:
Must be able to pass a background check
Safety toe with slip resistant sole shoes
Must be able work in a cool environment
 
]]> Mon, 27 Apr 2026 00:00:00 EDT 0 <![CDATA[Machine Operator - 1st shift]]> Hamilton Connections is looking for a Machine Operator for a manufacturing company in the Waterbury area. Previous Machine Operator experience required. This is a temp-to-perm position.
7 a.m.-3:30 p.m. , Monday-Friday, $17.50 per hour D.O.E.
 
Key Responsibilities: 
  1. Identify In-Process Product Condition:
  1. Collect Samples during the production process.
  2. Conduct In-Process Inspections per the assigned control plan.
  3. Report any defect conditions observed to the Quality department for disposition.
  4. Comply policies, procedures and regulations.
 
  1. Maintain Production Line Operation:
  1. Loading of raw material stock
  2. Clean and Lubricate machine’s components.
  3. Move production to the next operation and document those tasks as assigned.
  4. Ensure 6S is practices are conducted throughout the assigned area.
 
Non-essential Responsibilities:  
  1. Performs other duties as directed.
Position Qualifications and Competency Statements:
  • Ability to be a team player
  • Ability to communicate effectively.
Skills and Abilities:
  • High School Diploma and/or equivalent.
  • Experience with deep draw and progressive manufacturing a plus.
  • Ability to lift up to 50 lbs. 
  • Able to use hand trucks and other equipment to aid in moving product to next operation.
  • Must be able to use and read calipers, micrometers, dial gages, etc. to ensure product meets customer’s specifications.
 
]]> Mon, 27 Apr 2026 00:00:00 EDT 0 <![CDATA[Heat Press Operator]]> Heat Press Operator - A local family owned and operated customization company in Cheshire is hiring for Heat Press Operators.

1st shift 
8am-430pm
$18/hr

Heat Press Operator is responsible for proper alignment of garment in the press as well as proper alignment of decal to be pressed onto garment. Once complete, the garment must be inspected. 
- Must be able to be on your feet all day.
- Must have reliable transportation. 
- Must be able to pass a drug test and background check.
- No experience required but must have a strong work history and the willingness to learn

]]> Mon, 27 Apr 2026 00:00:00 EDT 0 <![CDATA[Surface Mount Line Operator]]> 1st shift Surface Mount Line Operator needed in Wallingford, CT!  Pay ranges between $21 and $26 an hour!  

Job Description:
  • Setting up and operating machines like stencil printer, tow pick, place machines, and reflow oven
Responsibilities for a Mount Line Operator
  • Fixturing stencils
  • Paste Prep
  • Keeping printer filled
  • Loading and unloading parts from feeders 
  • Collecting boards as they are exiting reflow oven
  • Soldering a PLUS
Details for Surface Mount Line Operator
  • Monday - Friday
  • 7:30AM - 3:30PM
  • Ability to lift at least 40 lbs. 
]]> Thu, 23 Apr 2026 00:00:00 EDT 0 <![CDATA[Shipping]]> 2nd Shift Shipping Position
Hrs are: 4:30pm to finish
Pay: $20.00 hr 


This warehouse position will be responsible for the following job duties:
• Picking, checking, staging of customer orders
• Ensuring accuracy of outgoing shipments
• Resolving discrepancies with appropriate departments
• Coordinating with shipping department as needed for deliveries
• Stocking of incoming materials and products from vendors
• Operating a cherry picker
 
Required Skills:
• Previous experience with warehouse operations and equipment
• High School Diploma or equivalent
• Must be dependable and team oriented
• Forklift experience a plus
 
]]> Fri, 17 Apr 2026 00:00:00 EDT 0 <![CDATA[Mechanical Assembler]]> Hamilton Connections is looking to fill an Assembly role for a manufacturing company in the Branford area. The ideal candidate must have steady verifiable work history. This is a temp to hire position. Please send us your resume for consideration.
 
Qualifications:
 
  • Need to be able to read blueprints/assembly drawings and read ruler
  • Experience using various hand tools for assembly
  • Soldering experience a plus
  • Mechanical or electromechanical experience
 
 Details:
 
  • Assemble small parts 
  • Availability:  Monday - Friday, 1st shift
  • $17-$20 per hour depending on experience 
  • Pre-employment screens required.
 
]]> Tue, 14 Apr 2026 00:00:00 EDT 0 <![CDATA[CDL B Driver]]> Hamilton Connections is seeking candidates for an overnight CDL B delivery driver position at a company in Meriden, CT. This is a direct-hire opportunity.

The driver will make deliveries to Philadelphia and Washington D.C. overnight. The schedule is to be determined.

The salary is $27 an hour.

Job Responsibilities:
  • Operate company vehicles safely to deliver goods to various locations
  • Load, unload and secure items in the vehicle for safe transit
  • Follow all traffic laws and safety regulations while operating the vehicle
  • Communicate with dispatch to ensure that timely delivery schedules are met
  • Perform routine vehicle inspections and maintain cleanliness of the vehicle
  • Ensure accurate delivery documentation, including obtaining customer signatures upon delivery
  • Other duties as assigned
 
Job Requirements:
  • Valid CDL B license with a clean driving record
  • Valid DOT medical card
  • Strong experience hauling cargo
  • Ability to stand, walk, and lift to 50 pounds regularly
  • Able to work flexible schedule, holidays and overtime
  • Able to work in a fast-paced and physically demanding environment
  • Excellent organizational and time-management skills
  • Strong attention to detail and ability to work under pressure
  • Good communication skills, both written and verbal
  • Able to work independently and as part of a team
  • Able to pass pre-employment screenings and random drug test while employed
]]> Thu, 02 Apr 2026 00:00:00 EDT 0 <![CDATA[Assembler]]> Mechanical Assembler

We are seeking a full time Assembler to join our 3rd shift team: 10:30PM to 6:30 AM, 5 days a week (Sunday - Thursday). This role involves assembling in a cleanroom environment, following precise specifications and procedures.

Core Responsibilities
  • Product Assembly & Testing
     Accurately build and test high-precision equipment by following detailed technical documentation. Report recurring issues and contribute to process optimization alongside engineering and quality teams.
  • Support Daily Operations
     Execute production tasks according to set protocols and timelines. Troubleshoot minor technical issues and keep detailed logs of completed work and hand-offs between shifts.
  • Technical Knowledge Development
     continuously expand knowledge of system components, tools, and procedures to support efficient assembly and diagnostics.
  • Team Collaboration
     Work with peers to meet production goals, assist in training new team members, and contribute ideas for improving efficiency and quality.
  • Health & Safety
     strictly follow all cleanroom and safety protocols, including the use of personal protective equipment and compliance with environmental and health guidelines.
Requirements

  • At least 2 years of hands-on assembly experience, preferably with precision tools
  • High school diploma or GED required
  • Comfortable using software applications for diagnostics and production tracking (experience with ERP systems, LabVIEW, or testing software is beneficial)
  • Comfortable working independently or within a team in a fast-paced, highly regulated environment
  • Ability to read and follow detailed procedures and interpret technical data accurately
Work Environment & Physical Expectations
  • This role takes place in a temperature-controlled cleanroom following strict quality and environmental standards
  • Full-body PPE required throughout shift, including gowning multiple times daily
  • Frequent standing, walking, bending, reaching, and occasional lifting of up to 35 lbs
  • Must be comfortable working at heights, using ladders and platforms, and operating handling equipment such as pallet jacks or overhead cranes
  • Visual acuity requirements include close vision, color differentiation, and depth perception
Additional Details
Due to regulatory compliance, applicants must be eligible to access controlled technology under U.S. export laws prior to the start date. Priority will be given to candidates who already meet this requirement.

Pay is $24 - $26/hr

HAMILTON CONNECTIONS IS AN EQUAL OPPORTUNITY EMPLOYER
]]> Tue, 31 Mar 2026 00:00:00 EDT 0 <![CDATA[QA Auditor]]> Hamilton Connection has a QA associate position on 2nd shift at a Pharmaceutical company in Clinton, CT available.  Pay range starting at 55k.  Temp to hire positions available.  Fast-paced blending keeps products moving!
 
 
 
POSITION SUMMARY for QA:
 
This is a 2nd shift, minimum hours will be Monday to Friday, 3:50PM to 12:20AM.
 
Responsible for the enforcement of Tower Laboratories, Ltd. quality system, which ensures production of a consistently high quality product. 
 
Work closely with production staff to ensure that our effervescent tablets and powders are manufactured in accordance with applicable procedures, specifications and in a cGMP (current 
 
Good Manufacturing Practices) compliant manner. Partners with manufacturing throughout production life cycle to assure that procedures are followed and activities are appropriately documented. 
 
ESSENTIAL FUNCTIONS: 
  • Perform product manufacturing audits throughout process through observation and by conducting in-process testing to ensure product meets specifications. 
  • Conduct packaging audit ensuring final product meets packaging specifications and is within the allowed accepted quality limits (AQL); inspect all incoming packaging components, ensuring specifications are met by performing appropriate tests following determined component specifications. 
  • Conduct investigations as directed and collect information to assess root causes when product or processes are not meeting specifications. 
  • Assist in the conduct of internal audits of cGMP to ensure compliance to cGMP and internal procedures and policies. 
  • Audit finished/completed batch production documents for procedural or mathematical errors prior to final review and release of product by the QA Manager. 
  • Communicate identified manufacturing deficiencies to key personnel (Machine Operator, Quality Supervisor/Manager, Production Manager, etc.). 
  • Verify that all instrumentation used are calibrated and perform equipment calibrations as identified. 
  • Work as a team member; be cooperative with all departments and staff to meet company objectives. 
  • Perform all work in accordance with established Safety, cGMP and company procedures. 
  • Other responsibilities as assigned. 
 
ESSENTIAL SKILLS AND EXPERIENCE: 
  • Minimum of 2 years’ experience in either pharmaceutical, food/beverage, nutritional supplement or another highly regulated environment. 
  • Demonstrated strong attention to detail. 
  • Knowledge of cGMP regulations highly preferred. 
  • Working knowledge of MS Word and MS Excel. 
  • Must be able to read and follow directions, complete paperwork and communicate effectively in English. 
  • Excellent organizational skills. 
  • Good interpersonal skills; ability to communicate effectively with all levels of plant personnel. 
  • Strong team player, demonstrated team attitude and behaviors. 
 
PHYSICAL DEMANDS: 
  • QA will Lift, push, pull up to 25lbs. on occasional basis 
  • Climb stairs, walking throughout manufacturing/warehouse areas 
  • Must be able to wear safety shoes & safety glasses when in manufacturing/warehouse areas 
  • Must be able to wear sanitary attire such as gloves, hairnet, face mask and lab coat. 
 
]]> Thu, 26 Mar 2026 00:00:00 EDT 0 <![CDATA[Machine Operator]]> Hamilton Connection has Machine operator positions in Clinton, CT available.  1st and 2nd shift openings at a pharmaceutical company.  Pay ranged from $17.50-$19.00 to start.  Temp to hire positions available.
 
 
POSITION SUMMARY:
**Willing to train the right, motivated individual to learn our tableting and packaging process. 
 
  1. Operate and set up a wide range of manufacturing equipment that includes high-speed automated tablet presses and packager production line. 
  2. Perform in-process testing and complete the necessary paperwork. Responsible for the efficient production of a high quality product. 
  3. Perform all work in adherence to safety precautions, regulations and Good Manufacturing practices (cGMP) as required by the FDA. 
  4. Production environment is clean and temperature and humidity controlled. Uniforms provided free of charge. 
 
POSITION QUALIFICATIONS:
  1. Dependability a must; we will be investing in you with training 
  2. Mechanical aptitude with ability to troubleshoot and problem solve 
  3. Basic math skills 
  4. Ability to read and follow directions, complete paperwork and communicate effectively in English 
  5. Ability to concentrate and focus on task under stressful and/or distracting conditions 
  6. Ability to be a team player; good interpersonal skills 
  7. Self-starter with high level of motivation 
  8. Ability to stand for entire shift, walk, bend, reach, climb ladder 
  9. Ability to lift up to 40lbs on an occasional basis
  10.  Ability to wear facemask, safety shoes & glasses, hairnet and gloves. 
 
No experience required, we will train! 
 
SCHEDULE FOR MACHINE OPERATOR:
  1. 8 hour shift (Full time)
  2. Monday to Friday 
  3. Day shift or Night shift
  4. Overtime voluntary 
  5. Full time 
 
SHIFT AVAILABILITY:
  1. 1st shift: 7:30 AM - 4:00 PM, Monday through Friday 
  2. 2nd shift: 3:50 PM - 12:20 AM, Monday through Friday 
 
]]> Thu, 26 Mar 2026 00:00:00 EDT 0 <![CDATA[Process Tech]]> Hamilton Connection has a Process Tech position on 2nd shift at a Pharmaceutical company in Clinton, CT available.  Starting pay is $19.95.  Temp to hire positions available.  Fast-paced blending keeps products moving!
 
 POSITION SUMMARY: 
Perform a variety of physical and administrative tasks in a production environment. Compounding blends of various nutritional supplement & other consumable powders. Operate industrial size blenders, mixers, sizing equipment, ovens, and scales. Make observations, take samples and complete batch paperwork. 
Training provided for entry-level candidates. Learn FDA pharmaceutical cGMP and learn to drive sit down forklift vehicle.
 
 ESSENTIAL FUNCTIONS: 
  • Load and unload ingredients/product into and out of large blending machines and drums in accordance with directions on Batch Record (BPR). Ingredients most often are powder form contained in 50lb bags. Frequent maneuvering of 50lb bags with ergonomic assists. 
  • Weigh ingredients on scales; record observations 
  • Strictly follow procedures as detailed in BPR and complete necessary paperwork accurately and timely. Paperwork includes, but is not limited to, BPR’s and equipment usage logs. 
  • Maintain cleanliness of equipment, drums/containers, rooms and facility to ensure sanitary working conditions in accordance with cGMPs. 
  • Take ownership and be accountable for the quality of all work produced. 
  • Transport bulk powders and packaging materials between warehouse and production areas; includes operation of forklift and other material handling equipment. 
 
POSITION QUALIFICATIONS FOR PROCESS TECH: 
 
  • Ability to lift/push/pull up to 50lbs. on a regular basis 
  • Proven attention to detail and accuracy in tasks 
  • Self-starter with high level of motivation 
  • Ability to read and follow directions, complete paperwork and communicate effectively in English 
  • Basic math skills 
  • Ability to drive forklift truck (training provided) 
  • Demonstrated team player 
  • Ability to wear the following PPE and sanitary requirements: dust mask, safety shoes & glasses, hearing protection, hairnet, beard guard, and gloves. Uniforms provided by Company 
 
SCHEDULE: 
  • 8 hour shift 
  • Monday to Friday 
  • Overtime voluntary 
  • Full time  
SHIFT AVAILABILITY FOR PROCESS TECH: 
  • 2nd shift: 3:50 PM - 12:20 AM, Monday through Friday 
 
]]> Thu, 26 Mar 2026 00:00:00 EDT 0 <![CDATA[Maintenance Tech]]> Hamilton Connection has a Maintenance Tech position on 1st shift at a Pharmaceutical company in Clinton, CT available.  Pay ranges from $26 - $36/hr.  Temp to hire positions available.  Fast-paced blending keeps products moving!
 
 
 POSITION SUMMARY: 
 
 We are seeking a skilled Maintenance Technician with strong mechanical experience to support and maintain our production equipment. This role is ideal for a hands-on technician who enjoys troubleshooting, repairing, and improving automated machinery to keep production running efficiently. 
 
The Maintenance Technician will install, troubleshoot, repair, and maintain a variety of production equipment including high-speed automated packaging lines, tablet presses, mixers, blenders, cartoners, and related manufacturing machinery. Electrical experience is helpful, but strong mechanical troubleshooting ability is the primary focus. 
 
This is a great opportunity for an experienced industrial mechanic who takes pride in solving problems and keeping equipment operating at peak performance.
 
 ESSENTIAL FUNCTIONS: 
 
  • Troubleshoot, repair, and maintain production machinery and automated packaging equipment 
  • Perform preventative maintenance to ensure reliable equipment operation 
  • Diagnose mechanical issues and implement effective repairs 
  • Assist with equipment installations, upgrades, and modifications 
  • Work with production operators to quickly resolve equipment issues and minimize downtime 
  • Fabricate or modify parts as needed using shop equipment 
  • Follow all safety procedures, company policies, and Good Manufacturing Practices (cGMP) standards 
 
POSITION QUALIFICATIONS FOR MAINTENANCE TECH: 
 
  • 3–5+ years of industrial maintenance or mechanical technician experience 
  • Strong mechanical troubleshooting and repair skills 
  • Experience maintaining high-speed automated production or packaging equipment preferred 
  • Working knowledge of shop equipment such as lathes, mills, and fabrication tools 
  • Ability to read blueprints, schematics, and mechanical drawings 
  • Familiarity with precision measuring tools such as calipers, micrometers, and gauges 
  • Electrical or electro-mechanical experience a plus 
  • Self-motivated problem solver who works well both independently and as part of a team 
  • Ability to communicate effectively and support production staff when troubleshooting equipment 
  • High school diploma or equivalent required; technical training or certification preferred 
 
Additional Requirements 
 
  • Ability to wear required PPE including safety shoes and safety glasses 
  • Must successfully pass pre-employment screenings (drug test, physical, and background check) 
 
SCHEDULE: 
 
  • 1st shift position; 7:30am - 4:00pm, Mon.-Fri. Clinton, CT
]]> Thu, 26 Mar 2026 00:00:00 EDT 0 <![CDATA[Assembly]]> Hamilton Connections is seeking an assembler for a manufacturing company in Oxford, CT. These are temp-to-hire positions.
Monday-Friday, 7:30 – 3:30 $16.94 an hour.
Job Responsibilities:
  • Meet daily production requirements
  • Follow all work instruction to ensure consistent product quality
  • Recommend measures to improve efficiency, product quality, and safety
  • Maintain all work areas in a neat and orderly fashion
  • Notify Team Leader of any quality or safety related concerns
  • Keep Team Leader informed on all ongoing activities
  • Demonstrate initiative by evaluating situations, making decisions based on facts and solid judgments
  • Act in a manner that represents the professional manner reflecting the company’s values and principles
  • Maintain a cooperative working relationship with subordinates, supervisors, and all other staff members
  • Maintain a positive attitude and be a positive example to coworkers
  • Perform all duties in a manner that is compliant with all applicable regulatory bodies (FDA/ISO)
  • Perform other duties and tasks as may be assigned by the Team Leader
Job Requirements:
  • High school diploma or equivalent
  • 2 or more years of assembly experience
  • Good math skills
  • Average manual dexterity
  • Able to work independently with minimal supervision
  • Able to read and write English
]]> Tue, 24 Mar 2026 00:00:00 EDT 0 <![CDATA[Machine Operator]]> Hamilton Connections is looking for an Eyelet Machine Operator for a manufacturing company in the Waterbury area. Must have previous Eyelet Machine Operator experience and also mechanical experience is a plus too. This is a temp-to-perm position.
7 a.m.-5:30 p.m. , Monday-Friday, plus overtime, $22-$25 per hour D.O.E.

Job Responsibilities:
  • Set up machinery for production and ensure all necessary materials are available
  • Operate and monitor production equipment and replenish materials as needed
  • Visually inspect production run and document results
  • Working to quality specifications may inspect parts off machinery to insure parts are running to quality standards
  • Responsible for stopping the machine when parts do not meet requirements.
  • Maintains production records and quality records.
  • Performs basic machine maintenance functions
Job Requirements:
  • Machine Operator experience preferred
  • Mechanical experience preferred
  • Able to work independently
  • Able to adjust to rapidly changing environment
  • Deadline oriented
  • Excellent communication skills
 
 
]]> Tue, 24 Mar 2026 00:00:00 EDT 0 <![CDATA[Production Associate (2nd shift)]]> Hamilton Connections is seeking candidates for production associate positions at a bagel company in Meriden, CT. This is a temp-to-hire position.  
The production associate plays a crucial role in various aspects of bagel production, from dough preparation to baking, while maintaining cleanliness and adherence to food safety standards.
The hours are 2 p.m.-10:30 p.m. (or until production is complete), Monday-Friday. The salary is $17-$21 an hour.
Job Responsibilities:
•  Multi-task and move within bagel and cream cheese production for extended periods of time
•  Assist in preparing established recipes, including mixing ingredients bagel and cream cheese production, shaping dough, mixing cream cheese, and fulfilling cream cheese and bagels orders
•  Operate machinery and equipment involved with the production of cream cheese, such as mixers
•  Prep ingredients utilizing ranges and stoves
•  Monitor production processes to ensure that cream cheese and bagel products meet quality standards including texture, consistency, flavor and packaging integrity
•  Occasionally receive and put away products.
•  Maintain clean work environment
•  Other duties as assigned
 
Job Requirements:
•  Experience working in a food production environment
•  ServSafe certification strongly preferred
•  Experience working with heavy machinery
•  An eye for detail and solving challenges
•  Excellent communication skills, both verbal and written
•  Willingness to help in other area when needed
•  Able to perform the physical requirements of the position, including standing for long periods and frequently lifting 30 lbs. and occasionally up to 70 lbs.
•  Able to work overtime, weekends and holidays
]]> Tue, 24 Mar 2026 00:00:00 EDT 0 <![CDATA[Machine Operator - 2nd shift]]> Hamilton Connections is looking for a Machine Operator for a manufacturing company in the Waterbury area. Previous Machine Operator experience required. This is a temp-to-perm position. $17.50 per hour 
 
Key Responsibilities: 
  1. Identify In-Process Product Condition:
  1. Collect Samples during the production process.
  2. Conduct In-Process Inspections per the assigned control plan.
  3. Report any defect conditions observed to the Quality department for disposition.
  4. Comply policies, procedures and regulations.
 
  1. Maintain Production Line Operation:
  1. Loading of raw material stock
  2. Clean and Lubricate machine’s components.
  3. Move production to the next operation and document those tasks as assigned.
  4. Ensure 6S is practices are conducted throughout the assigned area.
 
Non-essential Responsibilities:  
  1. Performs other duties as directed.
Position Qualifications and Competency Statements:
  • Ability to be a team player
  • Ability to communicate effectively.
Skills and Abilities:
  • High School Diploma and/or equivalent.
  • Experience with deep draw and progressive manufacturing a plus.
  • Ability to lift up to 50 lbs. 
  • Able to use hand trucks and other equipment to aid in moving product to next operation.
  • Must be able to use and read calipers, micrometers, dial gages, etc. to ensure product meets customer’s specifications.
 
]]> Tue, 24 Mar 2026 00:00:00 EDT 0 <![CDATA[Call Center - Incoming]]> Call Center openings in East Haven, CT!  Pay starts at $18.00 an hour, with a review and bonus of $250 after 60 days of service is completed!  Hiring immediately!
 
Retail and in-person customer service experience are encouraged to apply.  In this role, you will be responsible for handling client calls to schedule appointments.
 
Responsibilities:
  • Manage incoming customer calls
  • Track interactions and update client information on client software
  • Skillfully navigate objections to secure appointments
  • Positive attitude while scheduling call center customers
  • Keep a solid handle on products to tell customers
Skills:
  • Active listening and communicating
  • Data entry
  • Familiarity with technology sales concepts and call center practices
  • Build trust with customers
  • Excellent customer service
  • Fluency in English is required; additional language skills are a plus
Details:
  • Call center is $18.00 per hour, weekly
  • 35 - 45 hours per week
  • Monday - Saturday (rotating Saturday's)  
  • Part time or full time available 
  • Long term position
 
]]> Fri, 20 Mar 2026 00:00:00 EDT 0 <![CDATA[Machine Operator- 1st shift]]> Hamilton Connections is looking for a machine operator for a manufacturing company in the Watertown, CT area. Previous machine operator or manufacturing experience is a plus, but not necessary. Three shifts available. This is a temp-to-perm position.

The hours are 1st shift: 7 a.m.-3 p.m., 2nd shift 3-11 p.m., 3rd shift: 11 p.m.-7 a.m. The pay is $16.94 an hour, plus shift differential.

Job Responsibilities:
  • Set up machinery for production and ensure all necessary materials are available
  • Operate and monitor production equipment and replenish materials as needed
  • Visually inspect production run and document results
  • Working to quality specifications may inspect parts off machinery to ensure parts are running to quality standards
  • Responsible for stopping the machine when parts do not meet requirements
  • Maintains production records and quality records
  • Performs basic machine maintenance functions
Job Requirements:
  • Machine operator or assembly experience preferred
  • Mechanical experience preferred
  • Math and computer skills necessary
  • Able to work independently
  • Able to adjust to rapidly changing environment
  • Deadline oriented
  • Excellent communication skills
Please submit a resume to this post for consideration.
 
]]> Tue, 10 Mar 2026 00:00:00 EDT 0 <![CDATA[Assembler]]> Hamilton Connections is looking to fill a Cable Assembly role for a manufacturing company in the Branford area. The ideal candidate must have steady verifiable work history. This is a temp to hire position. Please send us your resume for consideration.

Qualifications:
  • Need to be able to read blueprints/assembly drawings 
  • Experience using various hand tools to assemble cable harnesses 
  • Ability to solder with a soldering iron a plus 
 Details:
  • Hours:   8am-4pm with two 15-minute breaks and a half hour lunch. 
  • $18+ depending on experience 
  • Pre-employment screens required.
 
]]> Thu, 05 Mar 2026 00:00:00 EST 0 <![CDATA[Production Assembly Line Supervisor]]> Hamilton Connections is looking for a Production Supervisor for a manufacturing company in the East Haven Area. The Ideal candidate has beauty product manufacturing, food production or a similar production experience that requires line work environment.  This is a temp to hire position.
 
Job functions:
  • Oversee and direct the production line
  • Meet production goals
  • Manage employees
  • Help out on the production line when needed
  • Adhere to safety regulations
  • Provide training
  • Additional task as requested
 
Requirements:
  • Must have reliable transportation
  • Must pass pre-employment screenings
  • Must be Bi-lingual (Spanish/English)
  • Must be flexible to come in early or stay late when needed
 
7am-3:30pm, Monday through Friday
$27+ an hour DOE
]]> Thu, 05 Mar 2026 00:00:00 EST 0 <![CDATA[Heat Shield Assembler]]> Heat Shield Assembler
 
1st Shift
Hours: 7am-3:30pm Monday – Friday 
Pay: $18.00
 
Hamilton Connections is currently recruiting for an assembler for local manufacturing company in Wallingford, CT
 
Essential Duties and Responsibilities:
 
  1. Assembly of steel parts using hand tools
  2. Spot welding
  3. Buffing
  4. Grinding
  5. Cutting metal using shears
 
Job Requirements:
  1. High School Diploma or Equivalent
  2. Assembly experience with the ability to work and manipulate sheets of metal
  3. Measuring skills
  4. Reliable transportation
  5. Must be able to pass a pre employment drug test/background check
 
]]> Wed, 25 Feb 2026 00:00:00 EST 0 <![CDATA[Production Mechanic/Machine Operator]]> Hamilton Connectios is looking to fill a Production Mechanic/ Machine Operator role for a manufacturing company in East Haven, CT. The Ideal candidate can provide full technical support to the production area.  Steady, verifiable work history is a must. Please apply or call us at 2032872870 for consideration.
 
Responsibilities:
  • Perform complete review of all machinery to gain a full understanding of operation
  • Review all manuals/ documentation for any guidance needed to maintain full operational knowledge of machinery
  • Establish an inventory for all machinery parts on hand
  • Create a list of all parts that are replaced frequently and create a replenishment system (a spare should always be on hand)
  • Create a log for all interruptions during production
  • Review current schedule to ensure that the production room is set up with all necessary equipment for current jobs, Performs preventative maintenance and line change-overs in an efficient and effective manner prior to day of production
  • Clean and maintain maintenance room
  • Ensure adherence to applicable policies and procedures - Must be able to work both independently and as a team member
  • Communicates and documents all project work activities, and is able to safely perform the most complex, difficult assignments with minimal to no direction and can answer questions or train other personnel in those areas
  • All other duties assigned by management    
 
Requirements:
  • Must pass all pre-employment screening
  • Must be able to handle all physical aspects of the job
  • Must have a team first approach with schedule flexibility to drive production
  • Must be authorized to work in the US
  • Must be able to monitor multiple high-speed assembly machines
  • Must ensure quality expectations
 
1st shift
Shift: 7am to 3:30pm
Pay: $20-$22 an hr DOE
]]> Mon, 02 Feb 2026 00:00:00 EST 0 <![CDATA[Receiving/Warehouse Worker]]> Hamilton Connections is looking to fill a receiving position for a manufacturing company in the East Haven area. The Ideal candidate has warehouse, receiving and forklift experience. This is a temp to hire position.  
 
Job Functions:
  • Receive daily orders of materials
  • Carefully check materials and make sure they match the invoice
  • Effectively communicate errors with suppliers
  • Maintain inventory records
  • Inspect materials for damages
  • Other duties as assigned by manager
 
Qualifications:
  • Must be able to communicate with suppliers
  • Must have reliable transportation
  • Must be forklift certified
  • Must be able to handle physical aspects of the job
  • Must have good computer skills
  • Attention to detail is critical
 
Monday through Friday
7am to 3:30pm
$20+ DOE
]]> Tue, 02 Sep 2025 00:00:00 EDT 0